UK · Contracting9 min readPublished 21 June 2026 · Updated 11 September 2026

Contractor Mortgages UK 2026: Day Rate Lending and IR35

A £600/day outside IR35 contractor can borrow up to £759,000 from a specialist lender, vs about £480,000 on salary and dividends at a high street bank.

Try the Contractor Mortgage Calculator

Enter your day rate to see specialist lender vs high street borrowing potential

The most common financial shock for IT contractors applying for a mortgage is discovering how little a standard lender will offer. A contractor billing £600/day earns the equivalent of £138,000 a year. A high street bank reading their tax returns sees salary plus dividends instead: about £106,574 if every pound of profit is drawn out, which supports roughly £480,000 at 4.5 times, and much less if profit stays in the company. A few lenders still look at the £12,570 salary alone and offer around £50,000. A specialist lender using day-rate underwriting might offer £621,000 to £759,000.

The gap exists because standard lenders assess what you draw from your company, not what you bill. Specialist contractor lenders have built different underwriting models that start from the contract itself, which reflects how IT contractors actually earn.

Why high street banks get it wrong

Most standard mortgage lenders assess income using two or three years of accounts or self-assessment tax returns and calculate an average. For a limited company director, income is typically structured as a small salary (often the personal allowance of £12,570) plus dividends. The salary is low by design, to avoid income tax and NI. Many contractors reinvest profits into the company rather than paying them out as dividends, further reducing the declared personal income figure.

Most high street lenders now take salary plus dividends from your SA302s or tax year overviews, often averaged over two years, and lend around 4 to 4.5 times that. That works if you draw every pound of profit out. Most contractors don't: they leave profit in the company, pay pension contributions from it, or have less than two years of accounts, and the figure the lender sees falls well short of what they bill. A minority of lenders go further and look at the salary alone: 4 times £12,570 is about £50,000, whatever the day rate.

This is not a reflection of the contractor's financial strength. It is a reflection of how their income structure looks to a lender whose underwriting model was designed for employees.

The day rate underwriting formula

Specialist contractor lenders bypass the salary-and-accounts model entirely. Instead, they calculate an annualised income using the day rate formula:

Annual Income = Day Rate × 5 days × 46 weeks

46 weeks = 52 weeks minus 6 weeks for holidays, gaps between contracts, and downtime

For a £600/day contractor, this gives: £600 × 5 × 46 = £138,000 annual income baseline. The lender then applies an income multiple (typically 4.5× to 5.5× for UK specialist lenders) to determine the maximum loan amount.

At 4.5×, the maximum is £621,000. At 5.5×, it is £759,000. The contracted day rate is what drives the assessment, not the salary drawn from the company.

High street vs specialist lender: the borrowing gap

Day rate	Day-rate income (× 5 × 46)	Salary + dividends at 4.5×	Salary only at 4×	Specialist (4.5×–5.5×)
£400/day	£92,000	£327,000	£50,000	£414,000 to £506,000
£500/day	£115,000	£404,000	£50,000	£518,000 to £633,000
£600/day	£138,000	£480,000	£50,000	£621,000 to £759,000
£800/day	£184,000	£632,000	£50,000	£828,000 to £1,012,000

Worked out with the same engines as the Contractor Mortgage Calculator. Salary + dividends assumes a director outside IR35 who takes every pound of profit out over 230 days (salary at £12,570, the rest as dividends after Corporation Tax), which is the best case: leave profit in the company and a lender reading your tax returns sees less. Salary only reflects the minority of lenders that ignore dividends. Specialist range applies 4.5× to 5.5× to the day rate annualised over 46 weeks. Indicative only; confirm current criteria with a broker.

How IR35 status affects your mortgage application

IR35 status has a material effect on what a specialist lender will lend you, and on which lenders are available to you.

Outside IR35 (limited company): Specialist lenders assess your day rate using the formula above. The fact that your income comes via a limited company and is structured as salary plus dividends is fully understood by these lenders. You will typically have access to the widest range of specialist contractor mortgage products and the highest income multiples.

Inside IR35 (umbrella company): Your income appears on payslips as a PAYE salary from the umbrella company, after employer NI and the umbrella margin are deducted. This PAYE income is more familiar to standard lenders, so you have more lender options. However, the income figure is lower than the contract day rate. Some specialist lenders will use the contract rate directly; others use the PAYE payslip figure.

The 2023 IR35 small company threshold change has opened outside IR35 status to more contractors, which has a downstream effect on mortgage borrowing power. See the IR35 small company threshold guide.

What if you're between contracts when you apply?

The most common timing question for contractors applying for a mortgage

Most specialist contractor lenders want a current signed contract at the point of mortgage application. If your contract has expired and you are searching for the next one, you are in the most difficult position for a mortgage application: not because of your earning ability, but because the lender's evidence of your day rate is a live contract.

Practical options: wait until your new contract is signed before submitting your application; use this period to get a mortgage in principle approved (based on your previous contract and track record) so you can move quickly once a new contract is in place; or speak to a specialist broker who knows which lenders accept a very recent contract (signed within days) at the time of full application.

A contracting history of 2+ years with no extended gaps is a strong supporting signal for lenders who are willing to work with short inter-contract periods. The key is not to apply during a gap, but to use the gap productively to prepare everything else (decision in principle, broker relationship, documents ready) so you can move fast once the contract is signed.

Remortgaging as a contractor: what changes

Remortgaging presents a slightly different challenge from a purchase. If your original mortgage was arranged on an employed-income basis before you became a contractor, your existing lender may not be able to offer you a new deal at a competitive rate, because they would need to reassess your income using their employed-income model, where you will appear to earn far less than your actual day rate.

The solution is to remortgage to a new specialist contractor lender via a broker. The same day rate underwriting model applies to remortgages as to purchases. You take your current contract, your contracting history, and your property's current value to the remortgage process, and the specialist lender assesses the income using the formula. This can mean significantly better rates and loan amounts compared to staying with a lender who does not understand contractor income.

Timing matters: many contractors approach the remortgage process 3–6 months before their existing deal expires, which gives time to line up the specialist lender assessment without urgency. Ensure your contract is current and extends beyond the expected completion date of the remortgage.

What specialist lenders typically require

Current contract

A signed contract with at least 3–6 months remaining (or recently renewed). Evidence that you are actively working at the stated day rate.

Contracting history

Most specialist lenders want 12–24 months of contracting history in the same field or adjacent roles. Recent career changers to contracting may have fewer options.

The contract document

The signed contract itself, showing the day rate, end date, and your name. Some lenders also want the hirer details.

Company accounts (if requested)

Not always required; the contract is primary, but some lenders ask for 1–2 years of accounts as supporting evidence.

Gap periods

Short gaps between contracts (4–8 weeks) are normal and most specialist lenders expect them. Longer gaps may require explanation.

Deposit

Standard minimum deposits apply (typically 5–10%). Better rates from 15–20%. No higher deposit required purely for contractor status.

Why you need a specialist contractor mortgage broker

Most high street mortgage advisers and generalist brokers do not have relationships with specialist contractor lenders. They will present you with standard mortgage products that assess your income the same way a bank does, on your salary and accounts, and you will get the same underwhelming offer.

A broker who specialises in contractor mortgages has direct relationships with lenders who use day-rate underwriting. They understand IR35 structures, limited company income, and the documentation that specialist lenders require. They can match you to the lender whose criteria best fit your contract situation, day rate, and contracting history.

When selecting a broker, ask: "Do you place mortgages for outside IR35 limited company contractors using day rate underwriting?" If the answer is a blank look, find another broker. The right broker will already know the day rate formula before you explain it.

Note: lending multiples and lender policies change regularly. The figures in this guide (4.5×–5.5× income multiples, 46-week annualisation formula) are typical specialist contractor terms as of 2026 but are indicative only. Always confirm current criteria directly with your broker and lender.

Contractor rate intel

Day rates move. Most people find out too late.

We track UK contractor rate movements across tech roles each month. Get our monthly contractor rate roundup: what's up, what's down, and where demand is shifting.

No spam. Unsubscribe any time. GDPR-compliant.

Frequently asked questions

Can I get a contractor mortgage if I'm between contracts right now?

It is harder but not impossible. Most specialist contractor mortgage lenders want to see a current signed contract at the point of application. If you are between contracts, options include: (1) waiting until you have a new contract signed before applying, (2) approaching lenders who place more weight on your contracting history track record (evidence of continuous contracting over 12–24 months can support an application even during a short gap), or (3) applying via a mortgage broker who can identify lenders with more flexible gap-period policies. A gap of 4–8 weeks is generally expected and most specialist lenders discount it. Longer gaps (3+ months) with no new contract in sight are the scenario where a specialist broker is most valuable.

Will a SIPP or pension contribution reduce my mortgage affordability assessment?

For specialist contractor lenders using day rate underwriting, pension contributions typically do not reduce the income figure used for affordability, because the income base is your contracted day rate, not your net take-home. However, some lenders also run an affordability stress test on your net monthly income. If you are drawing lower dividends because you are directing money to a SIPP, your bank statements will show lower monthly income, which can reduce what some lenders are willing to advance under affordability rules, even if the day rate multiplier headroom is higher. Speak to your broker about which lenders weight day rate vs bank statement income more heavily for your specific situation.

How long do I need to have been contracting to qualify for a specialist contractor mortgage?

Most specialist contractor lenders want 12–24 months of contracting history. Some will consider 6 months with a strong prior employment track record in the same field. Brand-new contractors with no track record face the most difficulty. A few lenders look at the combination of your contracting career plus your prior employed career; if you have been in IT for 10 years and only just moved to contracting, that context helps. The key is having a broker who knows which lenders are flexible on the entry requirement. First-time contractors from employment can sometimes access standard employed-income mortgage products for 12–18 months while building the contracting history the day rate route needs.

Can I remortgage as a contractor using day rate underwriting?

Yes, the same day rate underwriting rules apply to remortgages as to purchase mortgages. When your current mortgage deal expires and you want to switch to a better rate (or borrow more), you can apply to specialist contractor lenders using the same day rate formula. The key difference from a purchase: you already have a track record with a lender, which can help. However, if your existing lender does not understand contractor income (a common situation if your original mortgage was on a standard employed basis before you moved to contracting), your broker will need to identify which specialist lenders will accept a remortgage and use day rate underwriting. Remortgaging into day rate underwriting can significantly improve your loan-to-value flexibility and the rates you can access.

Does IR35 status affect what I can borrow?

Yes, materially. Outside IR35 contractors (limited company) have access to the widest range of specialist contractor mortgages with the highest income multiples, because lenders can use the full contracted day rate as the income base. Inside IR35 contractors (umbrella company) have their income shown on PAYE payslips, already net of employer NI and the umbrella margin. Some specialist lenders use the contract rate even for inside IR35 contractors; others use the PAYE payslip figure. Either way, the umbrella route tends to produce a lower assessable income figure than outside IR35, which reduces borrowing power. The 2023 IR35 small company threshold change has allowed more contractors to qualify for outside IR35 status, which has a downstream benefit on mortgage affordability.

What deposit do I need as a contractor for a mortgage?

Contractor mortgages do not typically require higher deposits than standard mortgages. Most specialist contractor lenders offer products from 5–10% deposit (90–95% LTV), though rates improve significantly from 15–20% deposit (80–85% LTV). For higher borrowing amounts (e.g., £600k+), some lenders require a minimum 15–25% deposit regardless of contractor status. The specialist contractor mortgage market has become considerably more competitive in the last few years, with more products available at lower deposit levels. A broker familiar with the current lender landscape will know which products are available at your specific deposit size and day rate combination.